|
|
 |
| Software |
Before proceeding with
a firmware upgrade, please contact
Customer Service at 215.723.0275
for additional information. |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compatible with the following amplifier models:
15S1G4, 30S1G4, 60S1G4, 120S1G4, 240S1G4, 10S1G4B, 10S4G11A, 15S1G4, 15S4G8A, 20S4G11A, 25S1G4B, 30S4G8A, 40S4G11, 60S4G8, 80S4G11, 120S4G8, 5S6G18A, 20S6G18, 350AH1, 500A225, 500A250A, 800A3, 800A3A, 1000A250, 1500A3, 2500A225
Amplifier Display Code Upgrade version 1.50
|
|
|
|
Free Program To Read Data From Any 7000 Series Field Probe
This demo program allows a user to read and display the composite field measurement from a single 7000 Series field probe using an RS-232 connection.
AR Probe Demo Program version 2.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
New Software Available To Instantly Upgrade Field Monitor FM7004.
Download it FREE now!
The latest firmware update for the FM7004 allows for up to 6 tables of field probe correction factors to be stored in the FM7004. One table of correction factors can contain up to 30 different frequency points. The tables are loaded on the FM7004 using the USB port and the Table Loader program.
To utilize this new feature, download and install the new firmware for the FM7004. Then download and install the table loader. Please see the FM7004 Users Manual for information on doing a firmware update and the complete operating instructions for this new feature.
FM7004 Upgrade Installer version 2.10
|
|
|
|
|
|
|
|
USB Driver for Model IF7001 USB to Fiber-Optic Interface
Compatible with:
Windows 2000,
Windows XP (32 bit), and
Windows Vista (32 bit)
IF7001 USB Drivers version 1.00
|
|
|
|
Compatible with the following products models:
15S1G4, 30S1G4, 60S1G4, 120S1G4, 240S1G4, 10S1G4B, 10S4G11A, 15S1G4, 15S4G8A, 20S4G11A, 25S1G4B, 30S4G8A, 40S4G11, 60S4G8, 80S4G11, 120S4G8, 5S6G18A, 20S6G18, 350AH1, 500A225, 500A250A, 800A3, 800A3A, 1000A250, 1500A3, 2500A225
NOTE: Only products containing IO-Board assemblies that were shipped with firmware revisions 2.00 or newer will support this update.
To determine your IO Board firmware revision use the *IOB?\n query.
IO Board Upgrade version 2.20
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
|
|
